New custom coffee table.

I have been asked to make a coffee table for a colleauge. He picked out and supplied an oak beam to use for legs and rails and a lovely waney oak board with a large knot in it which will be an amazing feature to this table.

The oak beam provided to me needed to be cut up to use for the legs and the rails. I used a table saw to machine to beam down into 4 chunks at 75mm x 75mm. I planed two faces flat and square with each other and used these edges with the table saw to cut the other sides of the timber square. I then check everything using a tri square and everything was spot on. The legs were 68mm x 68mm finished size before cutting the design into them. I used the remainder of the oak beam to cut out the rails.

I worked with my colleauge to design the table to his liking. He was certain on the design of the leg as it was his own. Plain rails was what he wanted so no detail on those. I set out marking the mortice and tenons which is the fixing method I am using for the rails to the tops of the legs.

After a lot of mallet and chisel work the mortices were chopped out and the tenons fit nice, tightly and all square. I placed the table top on the constructed legs and rails to give an idea of what the coffee table will look like when it is finished. The height was perfect and my colleauge is over the moon with it. I have some sanding left to do, glue the rails and legs together, 4 x buttons to make to fix the top to the rails and a generous 5 coats of danish oil which will bring out the beautiful lines and markings of this piece. There are many, many medullary rays in this table. Finished images are soon to follow!

 

Etsy Shop now open!

My unique handmade solid oak furniture is now available to buy direct from Etsy.

My shop is http://ryondesign.etsy.com

Check back often to find new items for sale.

New Gallery Pictures

I have another coffee table in my gallery. This one is a definite one of a kind piece. Everything you see on the gallery page now is available to be made. Remember no two pieces will ever be the same and I want to keep my products as one of a kind pieces. Similar... but never the same.

As they are made to order anything and everything can be custom. Length, Width, Height, Finish, even the Design if need be.

Think of anything you want made. You know that you will never find what your thinking of in the shops. I could make those thoughts reality. That's what I want to do! I don't want to make bog standard furniture!



Lets create something amazing!

Solid oak?

The term Solid oak in furniture should be as it sounds... Solid.

But...

I keep finding myself looking at handmade furniture in shops which are listed as a solid oak table or solid oak chairs that are not solid oak. Solid in my mind is made using one whole solid piece of timber, not many strips glued together to form a thicker piece.

This one table I have in mind was listed as solid oak. It was a lovely looking kitchen table, pretty grain patterns, a strong 2" thick top, and straight chunky legs. Very nice. But it was not solid like it says it is. Upon closer inspection every section of it was strips glued together. The whole table and it was £1300. I was a little disappointed to be honest, which I keep finding myself when looking around at "solid" furniture.

Maybe it is just because I know I use fully solid timber for my work and maybe expect things to be the same.

Quality made products will far exceed products of "not so good" quality. If any of you are out and about, have a closer look if you are thinking about buying solid wood items. Maybe you are totally happy with these types are products and if so, Fantastic. But just keep an eye out for things that are not what they say they are.

Frankenstein furniture.

As well as wanting to make gorgeous new oak furniture from scratch I have recently started thinking up ideas which will combine many pieces of furniture together to create something different. Not necessary beautiful furniture, again just going with a different feel.

I will soon be setting myself a small challenge to have a go at this idea. I am thinking everything I will use must be pre owned and only obtained at places like car boot sales, freecycle or homeless charities like Emmaus. A small amount of cash per project and a limited number of pieces to use.

So for example. I will have £20 to get 3 pieces of furniture from Sundays car boot sale. Then create something by combining them all together.

I am thinking this side of what I'm creating only using recycled materials. Nothing new at all. Apart from glue and maybe fixings!

Some very crazy things running through my head with this in mind at the moment! Lets get this started!

Mallet!

I have been looking for a while now at getting a nice wooden mallet for fine chisel work instead of using a heavy hammer. While on my search for a decent mallet it seemed that all I found was either way to over priced for what it was or very cheap and tacky which and would fall apart after a few projects.

So I decided to make my own! That way I could make it to what I wanted it to do and what I wanted it to look like. I had a rummage around it my stack of small oak off cuts and found a nice chunk of kiln dried 4x2 and a perfect piece for a handle.

I started by cutting the head to size and giving it a 5 degree angle on each end. I took the handle piece and a plane and started to taper it gradually testing the grip until I was happy with the thickness. Next came the measuring and marking out as the idea was to make a mortice right through following the exact sizes of the handle and ensure a perfectly tight fit. I marked the center of the head, top and bottom and sent a 4mm pilot drill through the make sure the hole was straight before sending a flat wood bit through to remove most of the waste.

Next job was to clamp down to head and begin the chisel work to remove the rest of the waste wood and to form the tapered mortice. Once I got to the inside edges of my marking lines I began testing the fit regularly to keep on top of the perfect fit I was after. It wasn't long before I was happy with the fit.

I grabbed a bottle of wood glue and a rubber mallet and placed to head in a vice and roughly worked out where the glue would need to be placed on the handle to sit inside the head. I applied the glue to both pieces and started to tap the handle down from the top until it wedged firmly inside the head piece. The fit was perfect and didn't really need and glue but it is in there anyway for added support.

Waited a few hours for the glue to set before taking some sandpaper to it and taking off all the edges and corners. A nice small coat of Danish oil to bring out the grain and a small amount of wax after it dried finished it off nicely.


 This is the finished mallet :

I am very happy with the result, the weight is just right and it looks a hell of a lot nicer than everything else I was looking at. After a few weeks of use it is still perfect. Still looks brand new and still solid.

It was an easy tool to make which I urge people to try making themselves instead of purchasing those on sale at the moment. Don't get me wrong, I'm sure many on sale are fine and perfect for the job its meant for just in my mind they just didn't work for my personal tastes. So why not try making one!? A basic tool kit and knowledge is all that's needed. Plus it will surely add to the satisfaction of using a tool you made yourself to complete a project!!

A few pictures now on the gallery page

I have put up 4 pictures of 2 coffee tables I have made in the gallery page.  I will upload a few of my other pieces in the next few days.